Billet Machined Gearbox Plate & Gear Cover for Axial SCX-10 & Wraith 2.2 C25605BLACK

Billet Machined Gearbox Plate & Gear Cover for Axial SCX-10 & Wraith 2.2 C25605BLACK

OVERVIEW
Plastic gear covers are boring! Upgrade your Axial Wraith or SCX-10 with our Billet-Machined Gearbox Plate, Gear Cover, and Slipper Cap Set. The gear cover is Billet machined from aluminum alloy, and features an o-ring sealed center cap for quick access when you need to make slipper clutch adjustments. Also included is a Billet-machined cover plate for the alloy gear cover to attach to. These sets are available in black (red cap), gunmetal (orange cap), or silver (black cap) anodizing.

Item# C25605BLACK
Barcode: 91789020273

Stock: Low Stock Sku: C25605BLACK
$49.99

Customer product review

4.0 rating based on 1 review

Great upgrade part but......

4.0 rating

Great part and typical Integy quality. No complaints there, however, it should be noted, the slipper cover included here will not clear the stock slipper shaft on the Wraith transmission. The shaft is too long so the slipper gear pad makes contact with the inside of the cover and is still about 3mm short of seating on the motor plate. A shorter slipper shaft will have to be used. At this point, I've not found one so I'm using the stock plastic slipper cover. Kind of bummed due to the cost and not even being able to use the cover and (very cool) threaded slipper adjustment cover...

OVERVIEW
Plastic gear covers are boring! Upgrade your Axial Wraith or SCX-10 with our Billet-Machined Gearbox Plate, Gear Cover, and Slipper Cap Set. The gear cover is Billet machined from aluminum alloy, and features an o-ring sealed center cap for quick access when you need to make slipper clutch adjustments. Also included is a Billet-machined cover plate for the alloy gear cover to attach to. These sets are available in black (red cap), gunmetal (orange cap), or silver (black cap) anodizing.

Item# C25605BLACK
Barcode: 91789020273


Please apply threadlock on all metal-to-metal interfaces prior to installation; failure to do so does not qualify for warranty coverage or replacement. Extra hardware and/or permanent modification may be required to install some products, and some products may eliminate OEM features. Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language. Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed.


Integy products are designed for experienced RC enthusiasts; step-by-step instructions are not included for most items. If you do not know how to assemble, install, configure, or use a product, please ask your local hobby dealer for assistance.

Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.

  • For more product fitment info and guides, go here: Product Instructions
  • If you have questions about this product, contact us first by going here: Get Help

You May Also Like

Featured Products

  • Billet Machined Gearbox Plate & Gear Cover for Axial SCX-10 & Wraith 2.2
  • Billet Machined Gearbox Plate & Gear Cover for Axial SCX-10 & Wraith 2.2 C25605BLACK

$49.99