NOTE: Hubs are bolt-on for the RC10B4.2 Factory Team edition only, which uses a 3/16x3/8' bearing on the inside, and a .187x.196 bearing on the outside. The other B4.2 versions use two 3/16x3/8' bearings. To install these on your non FT B4.2, you will need one pair of Team Associated #7935.
Item# C25297SILVER Barcode: 91789019445
Please apply threadlock on all metal-to-metal interfaces prior to installation; failure to do so does not qualify for warranty coverage or replacement. Extra hardware and/or permanent modification may be required to install some products, and some products may eliminate OEM features. Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language. Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed.
Integy products are designed for experienced RC enthusiasts; step-by-step instructions are not included for most items. If you do not know how to assemble, install, configure, or use a product, please ask your local hobby dealer for assistance.
Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.