OVERVIEW Long suspension arms and upper adjustable turnbuckles pair with oil-filled shocks with threaded preload adjustment and adjustable mounting angles to handle the bumps and jumps. There are also turnbuckles for toe adjustability on the dual bellcrank steering system. The front chassis brace doubles to protect the steering system from damage, while the rear chassis brace lets the i10T pop over higher obstacles. The stadium monster truck body is already precut and prefinished, and you'll also find a pair of LED flood lights mounted to the front bumper. This 'roller' version does not include electronics; it requires a 2-channel radio system, ESC, motor, battery, and servo of your choice. CHASSIS DRIVETRAIN SUSPENSION STEERING MORE SPECIFICATIONS To get up and running you will need: Item# i10T-NE
Want a simple, fun, off-road truck that's just at home in your backyard as it is crushing cars? Our i10T 2Wd monster truck is ready to go! Designed to emulate the look and feel of the loud and powerful stadium monster trucks and car crushers, this 2WD machine is available in a complete package that is ready to run and fun to drive. The i10T starts with a durable, molded tub chassis with removable front and rear bulkheads. The chassis has high ground clearance for all terrain capability. A simple but race-proven 3-gear transmission drives the rear wheels through a durable gear differential. An adjustable slipper clutch is standard equipment, as are steel long-reach rear dogbones and axles. All-terrain monster truck tires are pre-mounted and pre-glued from the factory, ready to roll. You will also find a set of ball bearings throughout the drivetrain. Finally, there's a heavy duty adjustable rear wheelie bar that will keep you on two wheels when pulling high powered wheelies!
High-clearance molded tub design
Adjustable molded battery stay
Impact absorbing front bumper
Bumper-mounted LED lights
Racing 3-gear transmission
Rear gear differential
Adjustable slipper clutch
Molded gear cover
Adjustable motor mount
Rear steel dogbones and axles
Full ball bearings in drivetrain
Monster truck dish-type wheels
Pre-mounted and pre-glued monster truck tires
Long-reach lower suspension arms
Turnbuckle adjustable upper links
Oil-filled dampers
Threaded damper bodies
Front metal suspension brace
Adjustable camber
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear wheelie bar
Dual bellcrank design
Built-in servo saver
Adjustable front toe in/out
Pre-painted stadium monster truck body
Length (not including wheelie bar): 420mm (16.5-inches)
Width: 320mm (12.6-inches)
Height: 236mm (9.3-inches)
Wheelbase: 285mm (11.2-inches)
Weight (RTR, no battery): 1905g (4 lbs. 3.2-oz.)
2-channel radio system
ESC and motor
Steering servo
6-cell NiCd/NiMH or 2S-3S LiPo battery pack
Barcode: 917890017743
Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.
All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.
Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).
Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.
Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.
Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.
Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.
