OVERVIEW CHASSIS DRIVETRAIN SUSPENSION STEERING SPECIFICATIONS To get up and running you will need: C24618 i10B01 1/10 i10B 4X4 Performance Buggy manual Item# C24618
Jump into the world of 4wd buggy racing with the i10B01 1/10-scale performance buggy. Designed for the newcomer to 4WD, we offer this chassis-only pre-built version for those of you who wish to run your own electronics. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10B features a center driveshaft with adjustable slipper clutch as standard equipment.
Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Pin-type tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Long suspension arms and upper adjustable turnbuckles pair with aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability. Hex head countersunk hardware is used throughout. A sleek 4wd buggy body with wing is already precut and prefinished.
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Low profile molded front bumper
Removable Lexan rear wing
All hex hardware
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain
Long-reach lower suspension arms
Turnbuckle adjustable upper links
Anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out
Length: 16.3-inches (415mm)
Width: 10.03-inches (255mm)
Height: 5.59-inches (142mm)
Wheelbase: 10.82-inches (275mm)
Weight: 3 lbs. 10.2-oz. (1650g)
Radio system with 1 servo
Motor (1/10-scale size, brushless or brushed)
ESC (1/10-scale size)
6-cell NiCd/NiMH or 2S LiPo battery pack
Barcode: 91789015371
Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.
All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.
Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).
Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.
Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.
Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.
Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.
Awesomeness
Most amazing car great price