This is a nice set up kit, I have the associated B44.3 and had to make two modifications to make this work, First i had to shave off the back of the front nuts that hold the equipment onto the axle. the front axles are shorter in the front and this allows enough room to grab several threads. With this done everything works except the toe ruler. Upon a suggestion from Integy I ended up using two 3/32 washers, one on each side. the washer goes on first then the measuring tool. This now will allow the tow ruler (the shortest one) to measure your toe. without the washers spacing the tool out the toe ruler is too long and you can not get a toe measurement. I would highly recommend this to everyone, You can get everything set up correctly. no more eye balling it, (it was way off)
Hello, he(she) would need the manual of instructions, where I can obtain it?
OVERVIEW Out of the box, the Universal Setup Station System will work with most 1/8-scale buggy or truggy with standard 1/8-scale axles and wheel nuts, such as: Associated RC8/RC8T, SC8; Hobao Hyper Series; HPI/Hot Bodies D8/D8T, Hellfire; Kyosho Inferno Series; Losi 8IGHT/8IGHT-T series; Mugen MBX/MBXT series, OFNA LX One; Tamiya 801x/801xt series, XRAY XB8, 808 series, etc. The Universal Setup Station also comes with two sets of adaptors; the Type-A adaptors are for vehicles with 6mm x M5-threaded axles such as the Traxxas Revo/T-Maxx 2.5/3.3, HPI E-Savage, and Losi LST1. The Type-B adaptors are for the HPI Savage 2.5/4.6/X/XL which uses 8mm x M5-threaded axles with a reverse thread on one side. Other adapters are available (sold separately) to adapt the setup station to other vehicles, please refer to our Universal Setup Station Axle Adapter Fitment Chart to find the correct adapters for your application. You can download the Universal Setup Station Axle Adapter Fitment Chart from HERE. Item# C23291
If you have ever been to a race track you will know that proper chassis setup is critical, and can be the difference between a DNF and a checkered flag. for 1/8-scale buggy, truggy, and monster truck owners we offer our 30-piece Universal Setup Station System. Crafted from aluminum and anodized in a gunmetal finish, the setup station can measure each corner of your vehicle individually - up to 15-degrees of camber, 30-degrees of caster, and +35/-40-degrees of toe. The measuring plates all ride on ball bearings for smooth movement and precise readings. The included carrying bag features a rubber grip handle and a two-sided zipper for storing the station when you are on the move.
Barcode: 91789008541
Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.
All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.
Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).
Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.
Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.
Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.
Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.
MUST HAVE ITEM
If you are just playing around with a RC car or truck, just keep playing. When you are a serious racer this setup station is a must. This setup station allows the vehicle to carry the batteries or fuel that would be the weight of race trim to the setup. You are able to dial in every toe, camber, caster with the actual vehicle weight, this is very useful. After a few runs you will be able to tell faster constant true alignment. Off road is great but you don't need all of what this item can go in depth with. On road is a must, your alignment is so close to perfect, that after a few runs you will notice some wear on the inside or outside of the tire. At this point it basically shows an tells what final tweaks to do. I use this on a XO-1 and on a on road E-Revo setup, after using the setup station, dialing it in, just rotate tires after each run. This will pay for it's self within a few set of tires you don't have to buy. My Xo-1 I use it the most because of loss of control at high speed an have to realign again. My on road E-Revo I haven't used it in a while, just always rotate the tires, an it is so precise all the tread will wear so even that it looks as if the tires were slicks. If you wan't to get dialed in, race faster, have the best handling, and save on tire wear, this INTEGY item is one of the most valuable tool you need to have, Save money and get extreme alignment with this INTEGY item, you will wish you would have purchased it sooner!