Item# C22484 Barcode: 91789004187 BLM-4MM - KV 1,600, no. of cells 6-7, 2-3 Li-Poly, RPM/V 1600, max., efficiency 78%, no load current/10v 4-9A (~67%), current capacity 10.5A/30s, dimensions 27,5x22.5mm, shaft diameter 3.17mm, weight with cable 22.9g, recommended model 100 - 380g, recommended prop 3SLi-Poly 7x5, 2SLi-Poly 8x4
Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.
All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.
Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).
Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.
Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.
Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.
Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.
Great 250 FPV brushless motors!!!!!
These motors are great for use in 250 class FPV. I use them for my QAV250 and my F330. They can swing any 6" prop. On my QAV250 its swinging a 6x4 3 blade and a 7x4.5 on my F330 with no effort at all, and no over heating. I use them with 20amp ESC's and wouldn't recommend any smaller esc's. You get 4 of them for the price of one Emax or DYS. They are a little slower at 1600kv then most 250 class motors at 2300kv, just run high pitch props, go up from 6x3 to 6x4. Be sure to buy the C22489 prop adapters, not the C22490 adapters these would force the motor to be mount upside down.